Explore Our Extensive Range of Energy and WaterMetering Products
Smart Mitaz is dedicated to simplifying property management with our wide selection of energy and water metering products. Designed to ensure precise measurement and enhance transparency, our advanced technology empowers property managers and tenants to efficiently manage utility usage. Discover how our innovative solutions can streamline your operations and deliver exceptional results.
This gateway uses LoRa communications, one GPS & one LTE antenna ports and is powered through 48 VDC PoE. Its LoRa interface operates in ISM bands and supports end- devices with class A & C, Listen Before Talk, Spreading Factor, Adaptive Data Rate (ADR) and GPS Timing and Geo-Localization Service.
DIN rail single phase smart AMI meter utilizing different communication Channels to CIU e.g. G3 PLC, WISUN RF, MBUS based on customer requirements.
Compliant with DLMS/COSEM
STS compliant,Support both STS unit and currency mode
Support dual measurement units and dual contactors in both neural and live line
Anti-tamper detection design
Prepayment and post-payment switchable
Multiple communication channels options to CIU e.g. PLC, Cable, RS485 or RF
Import and export energy measurement
Active energy measurement including forward active energy, reverse active energy, absolute active energy (|forward|+|reverse|), net active energy (forward-reverse)
Multi-tariff metering system: power consumption measured according to tariff period Tariff shift through meter real-time-clock (RTC)
Maximum demand measurement:block/sliding type
RS-485 (USB port) communication port
Local and remote disconnect/reconnect
Local and remote recharge
Local and remote firmware upgrade
Load profile record (programmable to record channel number, time interval, data item)
Data frozen function: Timing frozen, daily frozen, set frozen, event frozen available for measurement and value
Event record, saving: Detect and record events such as loss phase, power off, abnormal voltage
This LoRa water meters (NB-IOT, wM-bus optional) can achieve remote wireless meter reading and avoid the trouble of wiring compared with traditional wired water meter.
The water meter complies with international communication protocol, and was designed with advantages of low power consumption, long battery life and easy installation.
STS compliant
Remote meter reading and valve control
Multi-rate setting
Prepayment and post-payment switchable
Complies with LoRa / NB-IoT / Wireless M-Bus standards
Low power consumption, up to 10 years battery life
Commercial/Residential SmartPrepayment Water Meter
Ultrasonic measurement, piecewise calibration with high precision, anti-magnetic attack.
High definition and wide temperature range LCD display.
Measuring mechanism has no moving parts, so will never wear. Measurement accuracy is not affected by the usage cycle.
Online period can be set freely, during when the software can communicate with the water meter and read the real-time data and freeze data.
The meter freezes the data every 15 minutes. One message can read data of 96 freezing points each day, which greatly save meter-reading cost.
GPRS communication mode, cost is low.
Bluetooth communication is available, check and set data with the mobile APP.
Easy installation. The meter can be installed horizontally or vertically.
Totally sealed design, outstanding waterproof and moisture-proof performance.
Separate structure type is optional. When the signal is weak, the meter controller can be installed on the manhole cover.
Instantaneous flow real-time measurement. The smart water meter uploads real-time data of the instantaneous flow, by analyzing which potential leakage can be detected.
Prepaid Split Keypad Din-RailSingle Phase Electricity Meter With CIU
STD18-B operates with a Din Rail mounting and pole mounting accessories, consists of two parts. A customer interface unit (CIU), and a metering and control unit (MCU). A CIU is a keypad based display, to be installed within consumers homes wherever there is a plug point. A MCU is the main A meter, installed away from consumer's home in a kiosk, meter box or a pole-mounted enclosure.
Smart Mitaz Smart Keypad water Meters is composed of a Multi-jet prepaid water meter and a separate customer interface unit (CIU) with RF wireless communication module.
Application: Measuring the volume of cold water through water pipe.
Smart Mitaz Smart Keypad water Meters is composed of a Multi-jet prepaid water meter and a separate customer interface unit (CIU) with RF wireless communication module.
Application: Measuring the volume of cold water through water pipe.
STE38-A is an STS Standard compliant, keypad type, automatically valve controlled prepaid three phase electricity meter. It can be top up by Power Guard vending software with 20 digital Token and communicate with AMI system via LORA-RF module.
Application:
Counting the electricity consumption of users over a period of time.